Lencore Spectra i.Net: G41 Manual de usuario descargar pdf

Model

G41

SPECTRA – i.Net

v2.0

Lencore Acoustics Corp. One Crossways Park Drive West Woodbury, NY 11797 p 516-682-9292 f 516-682-4785 [email protected]

Touch pad wall plate can be attached to vertical surface with two

screws.

WALL PLATE

+ Dimensions – 2 ¾”w x 4 ¼”h

+ Touch pad wall plate can be attached to vertical surface with

two screws

WIRE REQUIREMENTS

+ Cat 5e cable or equivalent 4 Twisted pair

+ Standard RJ45 connector

INSTALLATION

To connect to the Spectra i.Net® System’s OP, use a patch cable us-

ing Cat 5E with RJ45 connectors and connect the wire from the OP’s

IR Port to the back of the wall plate. If an IR Hub has been specied

for multiple controls, the patch cable can be run from the OP to an

IR Hub and then to each channel of the IR Hub (A, B, C, D).

FUNCTION

The Spectra i.Net® IR Touch Pad Controller provides wall access

and immediate adjustments for the Spectra i.Net® Sound Masking,

Paging and Music System. The Touch Pad option is often chosen

for spaces such as conference rooms and board rooms, or any area

where individualized and on-going adjustments are desired.

Located on the wall plate used for the Touch Pad is an LED light

indicator that identies the current function of the system that

is being adjusted. The system functions that can be adjusted are

masking, paging, music, test and IR/ALL.

To use the Touch Pad use the left and right arrow keys in the center

of the pad to select the function types (masking, paging, music,

test, IR/ALL) that you wish to adjust. Once the system function is

selected, use the up and down arrows to make increases or de-

creases in the volume adjustments.

To mute and un-mute the system, simply press the Mute/Un-mute

button located at the bottom of the wall plate. The IR/All function

enables end users to mute or unmute the masking, paging and

music all at the same time.

IR TOUCH PAD

CONTROLLER

PRODUCT SHEET & SPECIFICATIONS

1 2 3 4 5